Fat Bears Rule—But Just How Fat Are They?

Science to the rescue!

Bear 435 in 2019. Fat Bear Week began in 2015 as a National Park Service effort to educate the public.Lance B. Carter/National Park Service

This story was originally published by High Country News and is reproduced here as part of the Climate Desk collaboration.

Brown bears are fattening up for winter hibernation in Alaska’s Katmai National Park and Preserve. And starting September 28, thousands of viewers from around the world will tune in for Fat Bear Week to watch the bears gobble fish from the Brooks River, estimate how well they’re packing on the pounds, and then vote for the portliest in a single elimination bracket. 

But just how fat are those fat bears? A winner will be crowned October 5, but webcam viewers (almost 650,000 cast votes last year) and actual visitors (15,000 came to Brooks Falls to see the bears in 2019) are just guesstimating. But there’s hope for achieving greater accuracy: GIS specialist Joel Cusick is pioneering a new technique for calculating the bears’ weight that has broader implications for noninvasive wildlife research. 

Bear 151 in 2019. A lidar scanning device only needs from 3 to 11 seconds to pass over the bears. Researchers can often measure them as they’re standing relatively while waiting for salmon to swim upstream.

N. Boak/National Park Service

The idea came to Cusick, who works for the National Park Service in Alaska, in 2018, while he was working on mapping and surveying at Katmai. A terrestrial lidar scanner, which uses lasers to determine distance and other measurements, was on hand to measure buildings. That’s the device traditional civil engineers use, but when Cusick wandered down to Brooks Falls and stood on a viewing platform 300 feet away from the bears, inspiration hit. He thought: Why not use the scanner to measure a bear’s surface volume instead? 

“I got a laser return from the butt of Otis, one of the more famous brown bears up there,” Cusick said. “I thought, ‘Wow, this just might work.’” 

Lidar, which stands for “light detection and ranging,” emits beams of light to measure three-dimensional objects or areas. When light waves hit an object, they bounce off and return to the sensor. Computers then use the speed of light to calculate the distance between the sensor and all the points. That figure is then processed using software that can model a three-dimensional object. Scanners have become standard technology that is deployed from the ground, the sky and satellites to measure vegetation growth. Now, they’re being used to measure bears’ length, height and girth. 

Bear 409, a sow named “Beadnose,” won Fat Bear Week in 2018. GIS specialist Joel Cusick is pioneering a new technique for calculating bears’ weights from afar.

A. Ramos/National Park Service

And bears like Otis, a legendary past champion of Fat Bear Week, are actually a pretty good fit for lidar scanning. Bears in Katmai are generally weighed in the spring, when they’re lighter, using a pulley system. The process is resource-intensive, however; it usually involves a helicopter and requires tranquilizing the bear. The 4.1 million acre park in southwestern Alaska (home to more than 2,000 bears) is already remote and mostly accessible only by plane. “In the fall, it’s always been a great mystery how heavy these bears get, because they just can’t weigh them,” Cusick said. 

The devices only need from 3 to 11 seconds to pass over the animal; since the bears are currently preoccupied—fishing for salmon swimming upstream to return to spawning grounds—they stay relatively still as they wait. “I didn’t expect them to be as still as they were,” Cusick said, who described them as “standing like statues.”

It initially seemed like their thick fur might prevent the laser from penetrating enough to be accurate, but the wet environment and mist mats it down enough to get a good reading. If they’re partially submerged, however, it becomes a challenge; the laser cannot scan through water. Besides, Cusick needs to get a good recording of the bears’ bellies, which are plump with fish, berries and other foods. “If we can get their belly just swinging right above the water, that’s the largest percentage of their volume and that’s what we hope for,” he said. “It’s a lot of patience, standing there like a photographer, waiting for a perfect shot. We’re doing the same with lasers.”    

Inspired by his success, Cusick returned in 2019 and 2020 with a more precise and faster scanner. His work confirmed that people did indeed vote for the fattest bear last year: Bear 747. (The bears are numbered by the park for research purposes.) The winner’s volume was 22.6 cubic feet or 1,416 pounds, compared to the runners-up, who trailed the aptly named 747 at 1,250 pounds (Bear 32, or “Chunk”) and 1,212-pound Bear 151, or “Walker.” The internet sensation began humbly in 2015 as a National Park Service effort to educate the public about the bears, who can gain up to four pounds of weight a day preparing for winter, and their surrounding ecosystem. 

There’s still work to be done regarding the accurate conversion of volume to mass. “The trick to getting the mass of the bear is knowing the density in pounds per square inch,” Cusick said. “That is the part of the equation that is still not determined.” He used a rough estimate to calculate weight, figuring that bears are 60 percent water and 40 percent fat.  

A survey team measures the volume of bears bulking up on salmon from the Brooks River, Katmai National Park, Alaska.

N. Boak/National Park Service

The fat bears aren’t being scanned this year due to COVID-19 and staffing constraints; Cusick is always accompanied by a “bear monitor” who knows the bears. (The voting process remains the same this year, however.) But other researchers are eager to continue the work in their own areas of expertise. “I’m trying to get all the ‘ologists’ I work with to step into the 3D world that is possible with this sort of on-the-ground terrestrial laser scanning,” Cusick said. “It’s a fast-growing technology.” 

And the “ologists,” as he calls them—mostly bear biologists so far—are interested. “I’m really excited about his work,” said Lindsey Mangipane, a polar bear biologist with the U.S. Fish and Wildlife Service. “It shows a lot of promise.” 

A recent study shows that polar bear mass is an accurate metric for evaluating the links between what the bears eat and how the population is doing. As sea ice melts, bears are spending more time on land, where they lack access to their traditional prey, such as ringed and bearded sales.

Mangipane and others are working on a study using captive polar bears in zoos, which are trained to step on scales and already have a known weight, to gauge the scanning method’s accuracy. Scanning would be done throughout the year to make sure that the bears’ shape—how fat or skinny they are—isn’t throwing off the results. Tests could start within the year. 

A lidar scan of bear 747, and a photo showing where he was standing near Brooks Falls at the time of the scan.

Courtesy of Joel Cusick

If the lidar scanning proves accurate for captive polar bears, scientists hope to use it as a noninvasive tool in the wild. Less-reliable sea ice means that the biologists’ job has become more dangerous than it used to be. “We used to go out and catch polar bears on the ice,” Mangipane said. “The last few years, the ice wasn’t good enough for us to go out. It’s important, moving forward, that we have new methods to get the data we need to make more informed management decisions.” 

More Mother Jones reporting on Climate Desk

Fact:

Mother Jones was founded as a nonprofit in 1976 because we knew corporations and billionaires wouldn't fund the type of hard-hitting journalism we set out to do.

Today, reader support makes up about two-thirds of our budget, allows us to dig deep on stories that matter, and lets us keep our reporting free for everyone. If you value what you get from Mother Jones, please join us with a tax-deductible donation today so we can keep on doing the type of journalism 2024 demands.

payment methods

Fact:

Today, reader support makes up about two-thirds of our budget, allows us to dig deep on stories that matter, and lets us keep our reporting free for everyone. If you value what you get from Mother Jones, please join us with a tax-deductible donation today so we can keep on doing the type of journalism 2024 demands.

payment methods

We Recommend

Latest

Sign up for our free newsletter

Subscribe to the Mother Jones Daily to have our top stories delivered directly to your inbox.

Get our award-winning magazine

Save big on a full year of investigations, ideas, and insights.

Subscribe

Support our journalism

Help Mother Jones' reporters dig deep with a tax-deductible donation.

Donate